HAMMER KEDER
The hammer keder is made especially for those cases where a sewing machine is not available and stitching to the textile cloth is not possible. In particular, on very large printed canvases; for example, 20 metres long, 3 metres high, often three sides will be made up with PVC cord and the hammer keder will be used on the fourth, short side. The cloth is tightened, and the hammer keder hammered in. By hitting the PVC cord and the cloth into the profile, the cloth tightens up nicely over the textile frame. The excess cloth is then cut off. The hammer keder is available in two different designs and multiple colours. The interior width of the aluminium profile will determine your choice.
SPECIFICATION
Material: PVC Shore-A 73 or 90
Dimensions: 7 x 12.4 mm, 5 x 14.7 mm
Surface: Arrow wide or narrow
Colour: Alu look, transparent blue, white, black
Packaging: Pack onto rolls of 100 metres.
Would you like to find out more? If so, please contact:
Sales
Telephone +31 (0) 492 592800
E-mail [email protected]